- 8 ohms 20Hz-20kHz 0.1% THD: 450W

 

- 4 ohms 20Hz-20kHz 0.1% THD: 650W

 

- 2 ohms 1kHz 1% THD: 1200W

 

- Bridged Mono 8 ohms 1kHz 0.1% THD: 1500W

 

- Bridged Mono 4 ohms 1kHz 1% THD: 2400W

 

- 140V or 200V 50 Hz-16kHz 0.5% THD: 1600W

 

- Signal to Noise (20Hz-20kHz): 100 dB

 

- Distortion (SMPTE-IM): < 0.02%

 

- Input Sensitivity @ 8 ohms: 1.07v (+2.8 dBu)

 

- Voltage Gain @ 8 ohms: 56.2x (35 dB)

 

- Output Circuitry: Class H

 

- Distortion (Typical):

    * 20 Hz-20 kHz: 10 dB below rated power: Less than 0.03% THD, 4 ohms and 

 

- 8 ohms

    * 1.0 kHz and below: full rated power: Less than 0.03% THD, 4 ohms and 8 ohms

 

- Frequency Response, 10dB below rated output power: 20Hz-20kHz, +0/-1dB, -3 dB points: 5 Hz + 50 Hz

 

- Damping Factor (Direct Outputs): > 250 @ 8 ohms

 

- Output Regulation: < 1.5 dB

 

- Input Impedance: 10 k ohms unbalanced, 20 k ohms balanced

 

- Input Clipping: 10 Vrms (+22 dBu)

 

- Cooling: Continuously variable speed fan, back-to-front air flow

 

- Connectors, each channel:

    * Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+)

    * Output: Covered barrier strips

    * DataPort V2: HD-15 connector

 

- Controls:

    * Front: AC switch

    * Rear: Ch. 1 and Ch. 2 gain knobs, 10-position DIP switch

 

- Indicators: PWR-ON Green LED, SIGNAL Green LED (1 per channel), CLIP Red LED (1 per channel)

 

- Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection; Stable into reactive or mismatched loads

 

- Power Requirements: 120, 230, VAC, 50-60 Hz

 

- Load Protection: On/off muting; Triac crowbar: ISA 750

 

- Rack-mount size: 3 RU

 

- Dimensions: 19" x 5.25" x 15.9" (48.3 x 13.3 x 40 cm)

 

- Weight: 47 lbs. (21.3 kg)