Technical Specification

Rated Power Bridge Mode 8Ω

300 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 4Ω)

150 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 8Ω)

100 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Input CMRR

> -65dB @ 1KHz

Power Bandwidth

10Hz - 30KHz ; 0, -0.5dB at rated 80 Watts 8Ω power

T.H.D. (2 x 4Ω)

< 0.05% @ 100 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω)

< 0.05% @ 100 Watts per channel from 20Hz - 20KHz

Rated Power (1 x 4Ω)

180 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (1 x 8Ω)

130 Watts @ 1KHz at < 0.1% T.H.D.

Minimum Load Impedance

4Ω

Maximum RMS Voltage Swing

37 Volt

Frequency Response

10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response

+5 to -15 from 20Hz to 20KHz

Input Impedance

10KΩ balanced

Cooling

Two temperature dependant variable speed 40 mm. high output DC fans

Controls

Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain

0.775V, 32dB or 26dB

Crosstalk

> -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise

> -106dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate

> 22V/us

Dampling Factor (8Ω)

> 400:1 @ 20Hz - 1KHz

Indicator LEDs

2 clip, 2 signal presence, 1 bridge, 1 active status/protection

Protection

Thermal, DC, turn-on bursts, incorrect loads

Connectors

XLR, speakon and binding post speaker output, 240/230 Volt 2.5 Amp IEC mains

Construction

16 ga. stell

Dimensions [HxWxD]

44 x 483 x 350 mm.

Net Weight

8 kg.

Gross Weight

9 kg.