Technical Specification

Rated Power Bridge Mode 4Ω

3600 Watts @ 1KHz at < 0.5% T.H.D.

Rated Power (2 x 2Ω)

1800 Watts per channel @ 1KHz at < 0.5% T.H.D. both channels driven

Rated Power (2 x 4Ω)

1200 Watts per channel @ 1KHz at < 0.5% T.H.D. both channels driven

Input CMRR

> -65dB @ 1KHz

Power Bandwidth

20Hz - 20KHz ; 0, -0.5dB at rated 400 Watts 8Ω power

T.H.D. (2 x 4Ω)

< 0.05% @ 600 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω)

< 0.05% @ 400 Watts per channel from 20Hz - 20KHz

Rated Power (1 x 2Ω)

900 Watts @ 1KHz at < 0.5% T.H.D.

Rated Power (1 x 4Ω)

1300 Watts @ 1KHz at < 0.5% T.H.D.

Minimum Load Impedance

2Ω

Maximum RMS Voltage Swing

93 Volt

Frequency Response

10Hz - 50KHz ; +0, -3dB at 1 Watt

Phase Response

+20° to -25° from 20Hz to 20KHz

Input Impedance

20KΩ balanced / 10KΩ unbalanced

Cooling

Two temperature dependant variable speed 120 mm. high output DC fans

Controls

Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain

0.775V, 32dB or 26dB

Crosstalk

> -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise

> -104dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate

> 25V/us

Dampling Factor (8Ω)

> 800:1 @ 20Hz - 1KHz

Indicator LEDs

2 clip, 2 signal presence, 2 active status, 2 protection

Protection

Thermal, DC, turn-on bursts, incorrect loads

Connectors

XLR, speakon and binding post speaker output, 240/230 Volt 20 Amp IEC mains

Construction

16 ga. stell

Dimensions [HxWxD]

132 x 483 x 498 mm.

Net Weight

35 kg.

Gross Weight

38 kg.