Technical Specification 

Rated Power Bridge Mode 4Ω

2250 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 2Ω)

1125 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 4Ω)

750 Watts per channel @ 1KHz at < 0.05% T.H.D. both channels driven

Rated Power (2 x 8Ω)

500 Watts per channel @ 1KHz at < 0.025% T.H.D. both channels driven

Rated Power (1 x 2Ω)

1260 Watts @ 1KHz at < 0.1% T.H.D.

Power Bandwidth

10Hz - 30KHz ; 0, -3dB at rated 350 Watts 8Ω power

T.H.D. (2 x 2Ω)

< 0.1% @ 900 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 4Ω)

< 0.1% @ 600 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω)

< 0.1% @ 400 Watts per channel from 20Hz - 20KHz

Input CMRR

> -65dB @ 1KHz

Rated Power (1 x 4Ω)

840 Watts @ 1KHz at < 0.05% T.H.D.

Rated Power (1 x 8Ω)

560 Watts @ 1KHz at < 0.025% T.H.D.

Minimum Load Impedance

2Ω

Maximum RMS Voltage Swing

77 Volt

Frequency Response

10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response

+5 to -15 from 20Hz to 20KHz

Input Impedance

10KΩ balanced

Cooling

Two temperature dependant variable speed 80 mm. high output DC fans

Controls

Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain

0.775V, 32dB or 26dB

Crosstalk

> -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise

> -107dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate

> 30V/us

Dampling Factor (8Ω)

> 700:1 @ 20Hz - 1KHz

Indicator LEDs

2 clip, 2 signal presence, 1 active status, 2 protection

Protection

Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors

XLR, speakon and binding post speaker output, 240/230 Volt 20 Amp IEC mains

Construction

16 ga. stell

Dimensions [HxWxD]

89 x 483 x 496 mm.

Net Weight

23 kg.

Gross Weight

26 kg.